Accessories

Bridges & Couplers

Dimmers & Switches

Energy Monitoring

Handheld & Tabletop Remotes

HVAC

Light Bulbs

Low Voltage I/O Control

Plug-In Modules

Security & Motion

Software and Computer Controllers

Sprinkler Control

 

LampLinc Plug-In Dimmer Module

   

A full-featured plug-in lamp dimmer that can be remotely controlled by any INSTEON controller. Features an adjustable ramp rate, preset dim level and local control. Dual-band technology receives power line and RF commands, and doubles as an Access Point.
LampLinc - INSTEON Plug-In Dimmer Module (Dual-Band)

Essential Info

• Control a light remotely, turning it on and off and adjusting brightness levels
• Full local control (Dim/Bright, On/Off)
• Incorporates a lamp into multiple lighting design scenes in minutes
• Transmits and receives INSTEON commands via powerline and RF
• Doubles as an Access Point

Specifications

General

Product Name:

LampLinc - INSTEON Plug-In Lamp Dimmer Module (Dual-Band)

Brand/Manufacturer:

INSTEON

Manufacturer Product No.:

US

2457D2

UPC:

US

813922010183

Warranty:

2 years, limited

INSTEON

INSTEON Addresses:

1 hard-coded out of 16,777,216 possible

INSTEON Links: 417
INSTEON Powerline Frequency: 131.65 KHz
INSTEON Minimum Transmit Level: 3.2 Vpp into 5 Ohms

INSTEON Minimum Receive Level:

10 mVpp nominal

INSTEON Messages Repeated:

Yes

Radio Frequency:

915 MHz

X10

X10 Addresses: 1 optional (comes unassigned)

Mechanical

Operating Conditions:

Indoors, 32ºF to 104ºF, 85% relative humidity

Dimensions:

3.2" H x 2.05" W x 1.05" D

Weight:

3.3 oz

Electrical

Voltage:

120VAC +/- 10%, 60 Hertz, single phase

Power Plug:

2-pin polarized

Controlled Outlet: 2-pin polarized
Pass-through Outlet: No

Load Types:

Plug-in incandescent lighting devices

Min. load:

5W

Max. load:

300W

Power Consumption:

0.84W

Safety approved:

Safety tested for use in USA and Canada (ETL #3193579)

 

 

 
 
 

Back to TOP
Follow INSTEON on Twitter
INSTEON on Facebook
©2004-2013 INSTEON®. All rights reserved.