74551

I/O Module - Garage Door Control & Status Kit

$84.95

Remotely monitor and control (open and close) your garage door using any Insteon controller (sold separately).

For a simple entry-alert setup, the smart home chime kit pairs an open-close sensor with a siren for audible notifications.

Often Bought Together

Just add a controller

Link this kit to a keypad to control and monitor the garage door from inside the home or from anywhere with Insteon Hub

Compatible with...

Any garage door opener with analog contact closure inputs

Monitor and control anywhere

When you add to Insteon Hub and Director app

Get an alert chime when door opens

Just link to our Insteon Siren and put it into chime mode for audible alerts if garage is opened.

Works With...Everything

The Insteon I/O Module can be linked to a vast array of devices within the Insteon ecosystem

Compatible with other Insteon switches, keypads, sensors, remotes, plugs, outlets plus more!

Rock-Solid Range and Reliability

Unlike other connected home switches that use Wi-Fi or other radio-only signals, Insteon utilizes a patented dual-band (power lines + wireless radio) mesh technology for 100% home coverage

What does that mean? It just works

Simple Installation & Set Up

Follow the straight-forward wiring instructions

Next-Level Control & Convenience

The Insteon Hub, together with our Director mobile app, gives you access to easier set up and editing of devices and scenes, setting schedules, and adding device-specific notifications

And get voice control with Amazon Alexa and Google Home

Essential info

  • Remotely monitor and control (open and close) your garage door using any Insteon controller (sold separately)
  • Includes sensors that provide status on whether the garage door is open or closed
  • Compatible with traditional 2-wire analog garage openers only - if your garage control button features a display panel, this kit is not compatible


How the Kit Works

I/O Module's output relay wires to your garage door motor just like your existing button, allowing you to remotely operate your garage. The included garage door sensor mounts to the garage door and is wired directly to I/O Module's sensor input. Receive instant alerts when using the Insteon Hub and running Insteon for Hub app (sold separately).

Do More with the I/O Module

Not interested in controlling your garage with Insteon? The Insteon I/O Module lets you monitor and control any low voltage devices such as alarm sensors, electric door strikes, and contact closures as part of your Insteon home automation network.

With one dry-contact sensor input you can control many Insteon devices throughout the house. Plus, use the built-in single-pole double-throw (SPDT) switch and connect any low voltage-powered device for continuous or momentary operation. Create your own remote-control door lock using an electric door strike and power supply, or use a security sensor to turn Insteon controlled lights on or off. I/O Linc acts as a repeater for all powerline Insteon signals, is compatible with Insteon and X10 products, and has a pass-through outlet for other AC devices.

When controlling devices like pool valves, you have the ability to leave it on for an extended period of time, giving it plenty of time to fill the pool. As it approaches the desired water level, you can then remotely turn it off. For devices like electric door strikes, set the output relay to momentary, allowing you to open the front gate using an Insteon remote or controller.

Note: The included Insteon I/O Module (2450) communicates over powerline only, which may cause issues if you are trying to remotely operate your garage from Insteon devices on a different electrical phase (circuit) or from an Insteon Mini Remote
Recommend having at least one other dual-band device on the same phase to bridge the I/O Module with Insteon RF-only or Dual-band devices

I/O Module Mechanical
I/O Terminals 5V (10mA), GND, Sense, N/C, N/O, Common (28-16 gauge wire)
Input jack 1/8" mini jack input (GND, Sense)
Input Type Contact closure only
Output Relay Capacity 5A @ 30 Volts (AC or DC)
Operating Conditions Indoors, 32 to 104°, up to 85% relative humidity
Dimensions 4.5" H x 2.5" W x 1.5" D
Weight 4.6 oz
I/O Module Electrical
Supply Voltage 120 Volts AC +/- 10%, 60 Hertz, single phase
Sensor Input 1/8" mini jack input (GND, Sense)
Power Plug 3-pin grounded
Pass-through Outlet Uncontrolled 3-prong (with ground), 120V, 15A
Power Consumption 0.93 Watts
Certification Safety tested for use in USA and Canada

Included Accessories
Magnetic Contact Sensor Type Normally Closed
Wire 30 Foot 2 Conductor, 22 AWG

Shipping costs are calculated based on location and are available when checking out. Shipping delivery times are based on the date the order ships.

Orders placed by 12pm PT (Monday-Friday, non-holiday) are expected to ship the same day.  Orders placed after 12pm PT are expected to ship the following business day.

Customers shipping to Canada will be responsible for all duties and import fees which will be due upon receipt.

PRODUCT WARRANTY

New Products

New items have a 30-day return window and are warrantied for 2 years from the purchase date.

Refurbished Products

Refurbished items are guaranteed to be in good working condition but may have physical imperfections and/or may not include original packaging and documentation. If the product fails to work, you may exchange it for like product within 30 days of receipt.

Clearance Products

Clearance items are sold as-is and do not carry a warranty.

RETURNS AND EXCHANGES

New Product Returns

All products must be returned within 30 days of the shipped date, in new condition and in the original packaging (refunds exclude shipping fees). A Return Merchandise Authorization number must be obtained from Insteon customer support prior to returning the new product.

After 30 days of the shipped date, no refunds will be processed by Insteon. If the Product is defective, requires an exchange or falls under warranty, Insteon will direct you to customer support for further information.

Warranty Returns

Defective Products returned within 30 days of the shipped date will be replaced at no cost to you and Insteon will cover the return shipping costs when using USPS Ground Advantage. Contact support@insteon.com for a Return Merchandise Authorization number and further instructions.

After 30 days of the shipped date, no exchange will be processed by Insteon. If the product is defective, requires an exchange or falls under warranty, please contact Insteon customer support at support@insteon.com for further information

  • 5 stars: 8 (67%)
  • 4 stars: 2 (17%)
  • 3 stars: 1 (8%)
  • 2 stars: 1 (8%)
  • 1 star: 0 (0%)
D
Daniel W. (Cambridge, US)
Years I spent with insteonk

I have used insertion for many years and have made up many shortcuts to solve problems. For example, I had problems with the valve on my grill staying on. I don't know if it is being kept on after use. Either way, I took an intern switch and a 120-volt gas valve to take care of that problem, put time off, or ask Alexa to turn it off or hit the button on one of the 8-button switches I have. I also use an Insteon garage door indicator. I wired it into a Myq garage door opener by wiring it to the button on the board. Insteon has made life much simpler. I get into bed. I say, Alexa, turn on bedtime, turn on the fan, turn off lights, and turn all buttons on the switches so it is pitch black. The following day, I say, Alexa, wake-up lights come on, and the fan is turned off. I could go on forever, but I only have so much time to complete This. I have only one complaint: the ceiling fan switch's high speed seems to fail, so I have had to replace a few of them. Would I purchase it again you bet ya..

Dan wietman

C
Christopher C.J.M. (Atlanta, US)
Capable But Not Adequate W/O Mod

This is not the first time I purchased the garage kit with the integrated Io controller. I used it on another home

However, this time it did not work properly. The newer garage doors on the input to the door opener are controlled by Smart buttons. These are just not momentary contacts, but have smarts that integrate. I see chips in the button. Therefore, wiring the Io controller directly to the garage door opener did not work. I’m still working it, but I had to purchase a spare button for my garage door opener, which is a chamberlain and I plan to solder across the push button contact (very small) the output from the Io controller and then connect that button to the garage door opener.

I’m not sure if the website had any disclaimers about the newer garage door openers. I may have missed it.

Thank you for sharing your experience. Please reach out to our technical support team if you haven't done so already as they'll be more than happy to assist and answer any questions you may have: support@insteon.com

R
Robert H. (Glenwood Springs, US)
Garage door controller

I used the door position to control an i3 paddle switch which lights a seldom used light above an entertainment center. When the door is left open, it is easy to notice the light while watching TV.

J
John R.B. (Leander, US)
Camera motion detected using the I/O Module

I use the I/O module connection to a Sealevel relay connection Blue Iris Camera Software to trigger events based upon motion detected by all my cameras. I have been using this for years. Works well!

r
raff r. (Los Angeles, US)
Garage Door

Works perfectly, easy install and connection to ALEXA

J
John D. (Surrey, CA)
shop acess

The unit was very easy to install. ( I have used the I/o module for other garage doors and monitoring the presence of water in my boiler room.. when moisture is sensed it causes water valves to be closed and emails are sent to me). The newest use of this devise is control of my shop garage door. This door provides access from the outside. Use my phone to open and close door. Email is sent indicating state of door and a camera monitors for backup. Insteon din relays control power to the door system for security. My other garage doors have worked flawlessly since 2016. Great product.

C
Christopher D. (Kansas City, US)
Item works perfectly - instructions hard to find or nonexistent

Item works without issue - sensor and switch setup was relatively straight-forward and linking to my Insteon hub was easy. The speed and consistency with which Insteon devices work and communicate continues to keep me returning for more as I expand the capabilities of my home automation. Instructions take a thorough read to get into the details and understand how to properly setting relay mode and duration.
Trying to find the described garage-door specific instructions noted in the documentation on the product page has turned up empty - some links no longer work, searching the support documentation only seems to turn up app documentation which is of no help for me.
Everything seems to work properly for my use case (it's just a low-voltage momentary switch after all), but I do wonder what I might be overlooking. Switch mode C is not what I need, and I suspect that it may just be a quick-start guide down this path I'm missing, but I may never know.

R
Richard W. (St Louis, US)
Third Garage Door control

This is the third one, others died probably due to a failed capacitor, lasts about 3 years or so, hopefully this new one is improved. Otherwise a good product, works great until it fails!

The I/O Module has had significant improvements over the past few years. The current shipping version 2.7 has no known issues. Feel free to reach out to support@insteon.com if you have any questions.

M
Michael H. (San Francisco, US)
Works Fine

Installed quickly and works well. I installed it on the Hub 2 and simply followed the options for the opening method I wanted. Later, I installed in on my isy499i so I could use the after sunset lighting options when the door opens. Worked just fine on either.

J
Jorge J.R. (Mountain Lakes, US)
Garage Door Opener

Easy to install. Works great. Wish it could be linked with Alexa

G
G.L. (Brookfield, US)
Many uses

I have a bunch of them and one is indeed for the Garage. I also monitor a Sewage pump, that can turn the water off in case the sewage level is to high in case a pump failure. You can use a small thermostat to have is close a relay and power a big heater. I interfaced it to a Samsung washer dryer to get notifications when they are done not to wast time or forget I had them on. Whatever you can imagine.

D
Darren O. (Clinton, CA)
Canadian Insteon user

I am ecstatic that Insteon carried on and seems to be doing better than ever love the products. My only wish is that there was a Canadian supplier.

Thank you for your kind words.

We do have a partner in Canada: https://www.aartech.ca/smarthome-insteon