Motion Sensor II

That’s about all I can say. The documentation is minimal, the 3 octet ID code was hard to find, it uses multiple undocumented “buttons”. It only works in my garage when I have it on USB power

This sensor is great, easy to install and to tweak. HOWEVER it has one thing that is missing. A timer that you could set so that the sensor switch turns off after a certain amount OF TIME, or not at all. Then, it would be PERFECT

I use motion sensors to detect wildlife around my home. The detector output is used to energize a relay whose output is connected to my security camera DVR. This connection will set the cameras to the location from which the motion was detected. The DVR is capable of acting upon a total of 16 No or Nc inputs. With the loss of the original Insteon, another manufacturer went bi-the-way. The EZIO8SA was an 8 I.O. Insteon capable module. I have a few of these legacy units still running and have downloaded a relay add-on which has a total of 8 outputs. It would be nice to have an Insteon multi-really module to use for this application. This motion detector works very well but the little flex mounting rod is a poor design.

I purchased 2 of these to replace gen 1 Insteon motion sensors. These are much easier to set up with the external set button and the available temporary motion override is helpful. My only complaints are that my gen 1 sensors worked great outdoors and had a better ball & joint mount that made positioning easier. This model is not designed for outdoor use, but I use it to trigger outdoor spotlights that have indoor insteon on/off switches so hopefully they last. One bonus for future versions or software update possibly would be the ability to override the motion from the app as opposed to the sensor since my sensors are mounted high and require a ladder to disable. But, again these sensors work great and were super easy to setup and install! Highly recommend

Newer form factor than older previous motion detectors. Significantly smaller, but detailed instructions are lacking. Had connection issued with my Indigo system until I replaced my older USB Modem Interface with a new 2413U v2.7. Connected right up!