Fixed: Sorting not working correctly with device and scene list Fixed: Swap Device Process Fixed: Activity log is only logging in Debug mode Fixed: Link management to battery devices Fixed: INSTEON Thermostat instability on incorrect reads Update EULA with current Year When SAVE is performed XML of settings are saved to = Settings/HouseLincSettings.csv Fixed: Spidering unknown devices getting stuck in loop Added GarageHawk remote and garage unit support Properties and Events Unable to manage Motion Sensor Update EULA with current Year Fixed issue with adding single band devices Fixed: Slow Transitions - Scenes Fixed: Thermostats not responding well Fixed various crashing issues Added Door sensor support Added INSTEON ON/OFF Outdoor Module/2634-222 Fixed: Exit linking mode NAK'ing on i2CS device Fixed: Error - unable to save backup Overall Stability fixes Fixed: Pause being cancelled incorrectly for scene triggers Corrected Din Rail defaults to Dual Momentary Stay awake command sent on success broadcast and pending changes for battery powered devices Fixed: relinking on NAK not restarted after first failure Fixed: Typos in release notes for beta Added Support for Smoke Bridge Added the ability to read properties for I/OLinc Changes to Half Link Report When INSTEON Device not in database NAK attempt is made to relink device Added support for Open/Close Sensors INSTEON for Hub and Smartlinc as a gateway; timeout changed from 5 to 10 seconds Added OutletLinc Dimmer feature support Retry logic for specific INSTEON ID NAK -FD - retry 4 times before considering a failure Added support for Keypad with Dimmer 0x43 with i2CS driver with enable LED, no blink on traffic support and programming lock Events: include a warning to user when canceling event (add an extra "do you wish to cancel "OK" message) fixed remote go into linking command sequence. fixed: email not functioning after a few days fixed: International product line latching mode issues Added Range Extender Model: 2992-222 devCat;00 subCat;1D FW:ANY Added Outdoor On/Off DB as Event Trigger Added Outdoor On/Off DB enabled the link tab to show links associated with device Added support for all versions of Smartlinc as INSTEON Gateway Released date: 3/19/2012 wireless thermostat will now control instantly if not battery powered fixed: adding triggerlinc issues fixed: occasional out of memory crash on adding new device Released date: 12/12/2012 Fixed Thermostat Adapter being added to HL Released date: 11/30/2012 fixed LED bulb property Enable Link on Power up advanced tab always shown new Keypad Dimmers, 0x01, 0x41 and 0x42 changed Outdoor ApplianceLinc to this: On/Off Outdoor Module changed removed "INSTEON" from door and leak sensors text label "disable" to "disable houselinc management" syncrolinc 0x07 0x09 0x30 to use "SmartLabs.Insteon.Devices.SynchroLinc01" instead of "SmartLabs.Insteon.Devices.SynchroLinc01CS" database dump driver updated devices_beta.xml to v.43 INSTEON Thermostat (0x09 0x0D 0x34) is detected as 2441TH allow user to select "synch NOW" for battery devices added 0x10 0x02 0x81 triggerlinc added checksum driver to 0x01 0x25 fixed: led bulb page was loading slowly faster database syncs Added Wireless Thermostat Added Leak Sensor Added Smoke Bridge Added Door Sensor Added Din Rail Dimmer Module Added Din Rail On/Off Module Added Micro Dimmer Module Added Micro On/Off Module Added Micro Shutter Module Added feature to increase signaling efficiency to devices PLM interface selector now has a More/Less Button Corrected issue with Restore Point saving email passwords Enabled Linking on Power Up for LED Bulb Corrected issue with IO Linc 50/60 in Scene Updated UI Controller with latest version Fixed issue with sync’ing using an Ethernet PLM – added timeout Wireless Thermostat support still under development Fixed: Din Rail mode switching Fixed: LED Bulb property changes Added support for 2487S KPL 0x02 0x1E 0x40. Added support for 2450 IOLinc 0x07 0x0D 0x40 Added support for hub 0x03 0x31 2242-232 Added support for 2487S-50 0x02 0x2C 0x40 Fixed: scene support for i/o linc 50/60 Fixed: runaway database syncs for Wireless Thermostat Update for Wireless INSTEON Thermostat Central Control Interface type now has a more/less button Wireless thermostat: on adding wireless thermostat, refresh button appeared when it should not Wireless thermostat: temp values showing up incorrectly 0 or 34 Wireless thermostat: external temperature when available for wireless thermostat Wireless thermostat queues database synch until device cleans up PLM Wireless thermostat has a "pending changes" label for queued property changes. Wireless thermostat no syncs pending changes when any traffic is seen from devices (temperature change, e Fixed: BulbLinc Enable linking mode on Power up logic was reversed. Fixed: switching between latching modes not being written to micro module Fixed: error blink not working in DinRail Fixed: wireless thermostat values cleared when window switching Wireless thermostat can now be responder in scene Wireless thermostat Cool/Heat points only cleared on pending C/F change. Fixed: BulbLinc Local ramp rate note getting set. Added Icons for PlugIn Dimmer/On-Off Modules Added INSTEON Thermostat Icons Added Wireless INSTEON Thermostat Icons Added definition for Outdoor ApplianceLinc Changed SKU and Name for 50/60 Keypadlinc Added support for SwitchLinc Dimmer for fwBE Removed Status LED option for Wireless Thermostat (not supported) Added INSTEON Hub Icons for US and International SKUs Support drivers for Wireless INSTEON Thermostat Support drivers for DIN Module On/Off Support drivers for Micro Module Dimmer Support drivers for Micro Module On/Off Support drivers for Micro Module Open/Close Support drivers for Plug In Dimmer Support drivers for Plug In On/Off Added the ability to save and open Restore Points Fixed Thermostat not being added correctly Added the ability to toggle Go into linking mode on power up for LED Bulb Released date: 11/21/2012 Adjusted default ramp rate and scene settings for new INSTEON LED Bulb 8-Watt (60W) Released date: 07/10/2012 Fixed ramp rate for new INSTEON LED Bulb 8-Watt (60W) Released date: 06/25/2012 Added support for new INSTEON LED Bulb 8-Watt (60W) Added support for Switchlinc ON/OFF 2477S Released date: 06/20/2012 Added support for new INSTEON Thermostat and INSTEON Wireless Thermostat Added support for SwitchLinc 2-Wire Dimmer Released date: 05/17/2012 Added support for more checksum products: Thermostat, Integrated Thermostat, SynchroLinc, iMeter, MorningLinc, IRLinc Receiver, IRLinc Transmitter, SmartLinc2 Added event trigger support to Thermostat and Integrated Thermostat Added option to send email when a PLM connection error occurs Removed MorningLinc's lock and unlock triggers because it does not support this feature Fixed UI issue when manually changing a Gateway Fixed sharing emails between the original and copies of an event Released date: 03/30/2012 Added support for Smarthome IP Camera 75790 Fixed a bug that immediately starts database sync immediately when a scene member is removed Added ability to duplicate an event (Right-click on an event and select Duplicate Event in the pop-up menu.The newly duplicated event is appended to the end of the list and is disabled by default Fixed the Events list to retain the focus on the selected event after editing it Remove the PLM links when a Scene is removed from an event if the PLM group was not part of the scene prior to adding to the event Fixed setting the default property values for KeypadLinc, Motion Sensor, 2-button RL2 Fixed flickering when changing a keypad button name Stopped setting Load Sense flag to SwitchLinc Changed format of a scene's last trigger information to "DateTime, Command, Number of Errors" Change input focus to the event name field when adding a new event Fixed the Refresh button for RemoteLinc 2 Propeties to display the battery-powered device information Fixed sorting of the broadcast timestamp in Scenes list Fixed setting pre-scaler for Momentary time Changed Refresh button to Write To Device Added support for updating the cameras definition Add support to search for Foscam IP Camera Model FI8918W Crash with camera delete - Several instances of similar crash in the log files - see additional info section Move PLM controller links to the top of the link table + fixed synchronizing device after factory reset HL settings will always win in property sync to a device Released date: 01/18/2012 Fixed version warning message on TouchLinc after deploying the configuration Released date: 12/22/2011 Fixed an issue that stopped displaying generic INSTEON devices in the Device List Fixed sending X10 All Lights On/Off command Released date: 11/23/2011 Added IP Camera support in HouseLinc Added support for X10 products Added support for InlineLinc On/Of Dual Band and 50/60 version Added support for updating Cameras definition – through server push Fixed KeypadLinc backlight brightness being set to 2% during synchronization Fixed PLM links not being created for group 2, 7 and 8 on KeypadLinc after changing from 6- to 8-button Added an option to change the number of firmware retry in Tools | Options | System, Controller Link App-Retry. The default value is 3 Fixed a crash when changing from 6- to 8-button on I1 Keypad Released date: 11/18/2011 Resoloved an issue with synchronizing properties of Motion Sensor and SynchroLinc Released date: 10/13/2011 Fixed KeypadLinc backlight brightness being set to 2% Fixed an issue when changing from 6- to 8-button on i1 KeypadLinc Released date: 10/07/2011 Added support to send INSTEON message in an Event - Sending Customer INSTEON Commands Added hyperlink in the Custom Commands dialog box with http://www.smarthome.com/insteon-custom-commands.html Added option to disable a device under the Properties tab Added Time Stamp to links. Located in the Advanced Tab for any newly created links Added ID column to Scene Editor Added support for RemoteLinc 2 Added support for setting LED level for SwitchLinc and InlineLinc in Events Added double confirm to all property reads. The returned value is accepted only if it matches with HouseLinc value; or 2 consecutive reads returned the same data Added tasks persistence: save the task queues on shutdown and continue with them on startup Added Queue task count information to the Status Bar- Provides Visibility of what task is currently running and how many are left (x / y) Auto-populate Date Added field when adding a device Improved database sync process Improved properties sync process Improved synchronizing a battery operated device Improved adding device process Improved deleting device process Changed event with Security feature to be triggered once-per-day randomly in the specified time frame instead of at-least-once Changed text in event for button pressed events to "Double-Tapped" Changed the Scene list to sort alphabetical by name by default Fixed scrollbars in Scene editor Fixed the Update dialog box being displayed behind HouseLinc window sometimes Fixed the Pause button functionality in the Status bar Removed the ability of the OutletLinc Relay to be a controller When deleting a TouchLinc device, also delete its configuration files Resolved checkbox disappearing in Scene editor. It should now happen less often Fixed excessive retry when a device is unplugged in the middle of database synch Fixing the ID column in Device List not being re-sizable Fixed issue with managing i1 KeypadLinc devices button properties (Toggle/ON/OFF) Fixed 8-button keypad being displayed as a 6-button Fixed Keypad button mode being displayed differently sometimes in Properties tab vs. Device List and Scene List Fixed a crash when clicking on Keypad button G or H after switching from 6 to 8 button Fixed half link to PLM group 0 (only at the end of the PLM database sync) Fixed a problem with Motion Sensor LED brightness cannot be changed by 1% Released date: 09/27/2011 Fixed triggering events based on RL2 button press Fixed missing PLM links to the new RL2 button when switching from 1-button to 2-button or from 4-button to 8-button Fixed changing KeypadLinc button mode under the Links tab Added support for Integrated Thermostat in Scene editor Added support for 2-button RemoteLinc 2 Released date: 07/15/2011 Updated User Interface and graphics Added support for TouchLinc TouchLinc Added Scene Management Included SceneConverter.exe in the setup and install it into the Settings folder Added abilities to change local On Level, Ramp Rate, LED, and other properties for applicable devices Added sortable Room column to the link display in Links tab Fixed beeping a device more than twice the specified number of seconds Removed checking status of battery-operated devices Updated sounds used when adding a device Fixed a bug in the Advanced tab that sometime did not show the information of the current selected device Prevented selecting invalid thermostat set points (cool set point must be at least 2 degrees higher than heat set point) Fixed inconsistent thermostat group names between the Device List and the Links tab Added an option to enable or disable Thermostat status reporting in the Properties tab. HouseLinc will not automatically create this link from now on The Advanced tab is now hidden on start-up. It can be revealed by selecting the Show Advanced Tab option in Tools | Options | System Changed setting device status in Properties tab to Unknown every time a device is selected. Device status is only updated when clicking on the Refresh button or one of control buttons Disabled HouseLinc Maintenance event by on new install and upgrade Added FTDI driver setup and install it if needed Released date: 06/14/2011 Added support for iMeter Solo Released date: 02/07/2011 Fixed a problem that did not always trigger an event Released date: 12/17/2010 Added support for TouchLinc Added auto-restart if the application encounters unexpected problem Added email retries (up to 3 retries) Updated product images for USB Stick, In-LineLinc, and LampLinc (Dual-Band) Corrected problem with loss of event information while saving settings Released date: 12/10/2010 Included Beep command under the Control/Status tab for devices that have beepers Added support for MorningLinc RF Doorknob/Deadbolt Controller (#2458A1) Added support for 240V 30AMP Load Controller (#2477SA1 and 2477SA2) Swap command now updates device ID in both Links and Events tab Info tab now displays the product page of a selected device Changed the I/O Linc Control page to include both Open Relay and Closed Relay options, even when I/O Linc is in Momentary Mode Many UI enhancement and performance improvements Release notes: http://www.insteon.net/HL250ReleaseNotes.html Released date: 06/30/2010 Fixed RemoteLinc rapid battery depletion issue. Released date: 05/11/2010 For the list of changes, please visit http://www.insteon.net/HL250ReleaseNotes.html Released date: 03/29/2010 For the list of changes, please visit http://www.insteon.net/HL202ReleaseNotes.html Released date: 11/23/2009 Added support for FTDI Virtual COM Port driver version 2.06. Released date: 11/04/2009 Added email alert feature. Users now can set up an event to send email to their email accounts. Added support to update Devices.xml automatically Added a new driver for I/O Linc with Firmware 0x33 or newer to support longer momentary delay settings. Digitally signed HouseLinc and the installer to identify SmartLabs as the publisher on Windows Vista and newer Centralized data (device definitions, settings and logs) location to better support online updates. Removed 9 minute ramp rate option as the Firmware no longer supports it Prompt to synchronize devices upon startup Improved Thermostat Adapter User Interface Improved Installer wizard Fixed bugs in Diagnostics tool Released date: 9/10/2009 Updated Device Definition file to cover more devices. Released date: 7/31/2009 Added support for TriggerLinc firmware revision 0x28 Released date: 6/22/2009 Added new firmware revisions: 0x38 Released date: 6/8/2009 Added new firmware revisions: 0x37 Released date: 5/13/2009 SwitchLinc 220V Relay added SmartLinc with firmware 7A Firmware 37 in I2.1 devices PLM 0x85 Remotelinc 0x80 Added new PLM support. Dark and light outside conditions fixed. Minor UI improvements. Improvements in communication with devices, including battery operated devices. Manual configuration wizard fixes. Fixed some device revisions that were not recognized properly. HouseLinc now backs up several revisions of the settings file. I/O Linc support More device support. Fixed problem with HouseLinc crashing during maintenance. Allow both Motion and Motion timed out to be used in events individually. Support for Motion Detector. Minor UI updates and bug fixes. More device support. Welcome to HouseLinc 2.