How to Wire the Water Shutoff Valve

Follow the steps below on how to properly wire and setup your Insteon Water Shutoff Valve.

Parts required:

2450 - Insteon I/O Linc

70275 - 3/4" Electronic Water Shutoff Valve

70412 - 12V DC Power Supply for Water Shutoff Valve

Wiring Instructions:

Step 1: From the Valve, wire the Green wire to the N/C terminal on the I/O Linc

Step 2: From the Valve, wire the Red wire to the N/O terminal on the I/O Linc.

Step 3: From the power supply, wire the positive side to the COM terminal on the I/O Linc

Step 4: From the Valve, wire the black wire to the unused wire on the power supply.

After you have finished wiring the shutoff valve to the I/O Linc, plug the I/O Linc into the wall for power. Tap the set button on the side of the I/O Linc. Each press will cause the shutoff valve to close, or open. You can now link the I/O Linc into your Hub app, or manually link it to an Insteon controller, like a water leak sensor.