Open/Close Micro Module Setup

Getting Started

step-1.png
Turn off power at the service panel and remove the existing wall switch.
step-2.png

Unfold all of the wires from within the junction box. Separate the black wires and cap them with wire nuts.

step-3.png
Turn on power and use a voltage detector to identify the live wire; this is your line wire.
 
step-4.png
Turn off power and connect the corresponding wires.
step-5.png
Reinstall your wall switch, attach the wall plate and turn on power.
step-6.png

Follow the on-screen instructions in the INsteon app to add Micro Module.


Guides and Manuals

 

Going Further