Motion Sensor II Setup

Getting Started

steps-1.png

Remove the battery pull tab.

steps-2.png

Follow the on-screen instructions in the Insteon app to add Motion Sensor.

Insteon apps require Insteon Hub.

step-3.png

When prompted, press and hold the set button until Motion Sensor beeps.

 
optional-disable.png

Tap the Motion button to enable or disable motion detection. Default disable time is 12 hours after which motion detection will resume.

optional-cable.png

Motion Sensor can be connected to power with an optional Micro USB cable (sold separately).

optional-corner.png

Use the reusable mounting strips for corner placement.

optional-flexy.png

For precise positioning, use the flexible mount.

 

Guides and Manuals

 

Going Further

 

Siren Setup

Getting Started

 
loud.png

Caution

Insteon Siren is loud. Use hearing protection when testing in close proximity.

 
 
step-1.png

Plug Insteon Siren into a power outlet.

step-2.png

Follow the on-screen instructions in the Insteon app to add Siren.

The Insteon app requires Insteon Hub.
Learn More →

step-3.png

When prompted, press and hold the set button until Siren beeps.

 

Guides and Manuals

Quick Start Guide

Owner's Manual

 

Going Further

 

Range Extender Setup

Discontinued Products

Looking for a product that isn't listed? Try searching all documentation.


Lock Controller Setup

Mini Remote (8-Scene) Setup

Guides and Manuals

 

Going Further

 

Ballast Dimmer Setup

Guides and Manuals

Quick Start Guide

Owner's Manual

 

Going Further

 

240V Load Controller Setup

Guides and Manuals

Quick Start Guide

Owner's Manual

 

Going Further

 

On/Off DIN Rail Module Setup

Guides and Manuals

Quick Start Guide

Owner's Manual

 

Going Further

 

Dimmer DIN Rail Module Setup

Guides and Manuals

Quick Start Guide

Owner's Manual

 

Going Further

 

Ceiling Fan Controller Setup

Guides and Manuals

Quick Start Guide

Owner's Manual

 

Going Further

 

Open/Close Micro Module Setup

Getting Started

step-1.png
Turn off power at the service panel and remove the existing wall switch.
step-2.png

Unfold all of the wires from within the junction box. Separate the black wires and cap them with wire nuts.

step-3.png
Turn on power and use a voltage detector to identify the live wire; this is your line wire.
 
step-4.png
Turn off power and connect the corresponding wires.
step-5.png
Reinstall your wall switch, attach the wall plate and turn on power.
step-6.png

Follow the on-screen instructions in the INsteon app to add Micro Module.


Guides and Manuals

Quick Start Guide

Owner's Manual

 

Going Further

 

On/Off Micro Module Setup

Getting Started

step-1.png
Turn off power at the service panel and remove the existing wall switch.
step-2.png

Unfold all of the wires from within the junction box. Separate the black wires and cap them with wires nuts.

step-3.png
Turn on power and use a voltage detector to identify the live wire; this is your line wire.
 
step-4.png
Turn off power and connect the corresponding wires.
step-5.png
Reinstall your wall switch, attach the wall plate and turn on power.
step-6.png

Follow the on-screen instructions in the Insteon app to add Micro Module.


Guides and Manuals

Quick Start Guide

Owner's Manual

 

Going Further

 

Dimmer Micro Module Setup

Getting Started

step-1.png
Turn off power at the service panel and remove the existing wall switch.
step-2.png

Unfold all of the wires from within the junction box. Separate the black wires and cap them with wire nuts.

step-3.png
Turn on power and use a voltage detector to identify the live wire; this is your line wire.
 
step-4.png
Turn off power and connect the corresponding wires.
step-5.png
Reinstall your wall switch, attach the wall plate and turn on power.
step-6.png

Follow the on-screen instructions in the Insteon app to add Micro Module.


Guides and Manuals

Quick Start Guide

Owner's Manual

 

Going Further